About this item

• ❤ [Question & Answer: Why can’t find the device on app? or Can’t find the device after changing phones]: Solutions: 1. Confirm your phone to connect with the 2.4Ghz wifi, not connect the wifi whose name has 5G suffix; 2. Turn on the wifi and bluetooth of the phone; 3. Factory Reset/Wifi reset: Pull out the charging gun, simultaneously long press the Ⓐ button and time button on the product screen until it shows “Factory Reset/Wifi reset”. 4. Re-start and add your device.
• ❤ [NO Need to Install the Additional GFCI Breaker & Why No Power When Using the Nema 5-15p to 14-50R Adapter]: Built-in CCID20 leakage detection and protection device, it is no need to install additional GFCI breaker for NEMA 14-50 receptacles. [Kindly Note When Using the 5-15P Adapter]: 1. Please confirm whether the Adapter cable is used for EVs before choosing the adapter cable. 2. The EV Chargers have a different wiring sequence than RVs even though they are the same adapter, so that causes the adapter you bought to not work.
• ❤ [6X Faster with ETL, FCC and CE Listed, Meets the Safety Criteria Defined by: SAE J1772, UL2231-1/-2, UL 991, UL 2231, UL 2251, UL1998 and UL 2594 & Compatible with all EVs and PHEVs Sold in North America]: Say goodbye to slow level 1 ev charger and enjoy 6X faster charging. Designed with J1772 TYPE 1 standard connector, compatible with Tesla (Adaptor Needed), Ford, GM, Nissan, Audi, Kia, Honda, BMW, Kia, Hyundai, Gmc, Chevy, etc.
• ❤ [Smart WIFI APP, You can Set the Charging Period]: Check the charging cost, history, fully-charged notification, track the charging status, during off-peak period. ❤ [Wi-Fi Reset/Factory Reset Function, Add New Device Quickly]: If you can’t find your device or you have replaced a new phone, just pull out the charging gun, simultaneously long press the Ⓐ button and time adjustment button on the product screen until it shows “Factory Reset”, then re-start your device.
• ❤ [Up to 7.68kWh High Speed Charging & Adjustable Amperage from 16A to 32A by Screen Button or APP]: Maximum current output of 32 Amps for 40A circuit breaker, 24 Amps for 30A circuit breaker, or 16 Amps for 20A circuit breaker (Please pull out the charging gun, long press “A” button to change the current). You can also adjust the current/amperage by APP before the charging.
• ❤ [2 Operating Modes: Real-time Charging or APP Start – Real-time Monitor and Set Charging Period by APP]: The LED Screen Clearly show the Amperage, charging speed, input voltage, delay time, etc. For the touch buttons: 1. Pull out the charging gun, otherwise the touch buttons will no respond; 2. Long press “Ⓐ” or “Time” button to adjust the amperage from 16A to 32A freely; 3. Switch the charging mode by APP directly. (You can do “factory reset” if doesn’t charging.)
• ❤ [Operating Regulations]: Plug-in Socket: Only works with Nema 14-50 plug-in socket; [Doesn’t charge or shows “No Plug error”]: Open your APP and set the charging mode to “Real-time charging”. Or you can “Wifi reset/Factory Reset” (Pull out the charging gun, simultaneously long press the Ⓐ button and time button on the product screen until it shows “Factory Reset”. Then wait 3-8 seconds or restart your device and charge normally.)
• ❤ [Nema Type 4 Protection Degree & 25ft Long Bold Cable]: Approved by NEMA Type 4, the Aimiler ev charger has a certain extent of IP66 waterproof. (We don’t suggest install in the direct sunlight or exposure rainy day.) Equipped with 25 feet military grade charging cable, the drop-resistant plug endures over 10,000 charges, super durable.